Inverted Channel Wire Decking
42″ d. x 46″ w. INVERTED CHANNEL wire decking. New. 2,500 lbs. capacity per piece based on evenly distributed load. 2.5″ x 4″ x 6 GA wire grid. (3)- 14 GA steel “INVERTED” step style channel supports for standard 1-5/8 step beams. 1-1/2″ waterfall on front & back. Gray powder coat finish. Weight: 17 LBS. Part Number: ND4246S3IA254046S00P
*Inverted means that the channel supports that are welded to the bottom of the wire deck have been turned upside down. These Inverted Channel wire decks are popular in the food distribution industry because the inverted channels don’t allow for dirt and debris to build up in the channels of the wire deck. They are self cleaning.
NOTES: This is a custom wire deck with an estimated 8-10 weeks lead time (production). Ships best way pre-paid & add. Freight Class 70. FOB: Chicago, IL 60446, Atlanta, GA 30297, Dallas, TX 75228 and Los Angeles, CA 92408
Wire decking with inverted channels is designed for food applications!
It’s required by the FDA that food products on palletized loads be stored on wire decking with inverted channel supports. The inverted channel support are turned the opposite way of standard wire decking. The U-Shaped channel is facing downward and cannot collect dust, dirt and food particles. The inverted channell is flat at the top and therefore will not collect debris.
A wire mesh shelving system with inverted channels is popular with food distributors. Inverted channel wire decking prevents dust and debris from settling in the channels. It helps keep your facility clean and safe. It really doesn’t add much to the cost of the wire decking. You simply turn the channel the other way. But it is a custom feature that will require an 8-10 week lead time.
The inverted step channel wire deck is our most popular inverted wire mesh shelving system. Inverted channel wire decking is commonly found in warehouses within the food distribution industry. The inverted channel is designed to fit a standard 1-5/8” step beam of a selective pallet rack system. If your beam doesn’t have a standard 1-5/8” step than you should buy inverted flared wire decks.