Affordable Teardrop Mold, Tool and Die Storage Racks
Teardrop Tool & Die Rack Bill of Material Includes:
12′ h. x 42″ d. Teardrop Upright Frame. New. 3″ x 2-11/16″ x 12 GA. steel column. Galvanized Bolted Bracing. 30,667 lbs. capacity @ 48″ vertical beam spacing. Includes 4-11/16″ d. x 5-5/16″ w. x 1/8″ foot plates. Color: Blue.
12′ h. x 42″ d. Teardrop upright. New. 4″ x 3″ x 11 GA. steel column. Includes 8″ d. x 8″ w. enlarged foot plates. 57,900 LBS capacity at 48″ beam spacing. Color: Vista Green.
96″ x 6″ Teardrop step beam. New. 10,240 lbs. capacity/pair. 1-5/8″ step. Includes factory installed piston lock. Color: Orange.
42″ d. X 46″ w. (38.25″ Channel Depth) Solid Steel Pallet Rack Decking (TWO PIECES PER SHELF LEVEL). New. 3,000 LBS capacity (UDL). Solid 14 GA steel top plate with 1-1/2″ waterfall on front & back. Includes 12 GA channel supports welded to the bottom. Designed to fit standard 1-5/8″ step beams. Gray powder coat paint finish.
42″ Deep x 46″ Wide Heavy Duty MBG Carbon Steel PressLock Bar Grate Pallet Rack Decking. (TWO PIECES PER SHELF LEVEL). New. Loading capacity: 4,500 lbs. each based on a standard uniform load. Finish: Powder Coat Medium GRAY. Mesh: 21PL7 (1-5/16″ x 7/16″ Centers) Bearing Bar Size: 175M (1-3/4″ x 12 gauge) Style: “F”. 71% Open. Band Type: T-Band on sides w/waterfall angle front & rear (1) Level, size: 48″ wide x 36″ span (1 deck per level) . NOTES: Loading: 44″wide x 42″deep pallet on (3) 2″w x 42″long runners. MAX weight of pallet is 4,500 lbs., with each 2″x 42″ runner considered as 1,500 lbs., with runners to span perpendicular to the support beams.
If you have light weight and/ or medium weight injection molds, tools & dies that you need to store, then please consider our affordable teardrop rack system. We use a standard teardrop pallet rack system in an effort to keep the cost down BUT that is really the only thing standard about it.
Our affordable teardrop tool & die storage rack system uses the heaviest uprights and beams available. We offer upright frames with heavy 3″ x 3″ x 12 GA or 4″ x 3″ x 11 GA steel columns and special 96″ x 6″ heavy duty roll formed beams to offer a heavy duty storage racks system.
As far as decking is concerned we can offer a thick solid smooth steel deck with channel supports underneath that can either set flush with the top of the beam or waterfall over. The alternative is for us to use a heavy duty bar grate decking that has holes which is allows oils to flow through.
Advantages of our teardrop mold, tool and die storage rack system include easy clip together design that doesn’t require nuts, bolts or hardware, 2″ adjustability of shelf levels, modular design…and did we mention this is the most affordable tool and die rack on the market?